1.REMOVE FRONT SEAT ASSEMBLY LH
2.REMOVE FRONT SEAT ASSEMBLY RH
Use the same procedure as for the LH side.
58901A
3.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY
58996A
4.REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET
46201E
5.REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
64309A
6.REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)
64910N
7.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
58410B
8.REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Spare Tire)
58410B
9.REMOVE DECK BOARD ASSEMBLY (for Full Size Spare Tire)
64997
10.REMOVE DECK FLOOR BOX LH
58386
11.REMOVE REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)
64716P
12.REMOVE REAR DECK TRIM COVER (for Full Size Spare Tire)
58577E
13.REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (w/o Spare Tire, for Compact Spare Tire)
58577E
14.REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE (for Full Size Spare Tire)
15.REMOVE REAR SEAT ASSEMBLY
67914B
16.REMOVE FRONT DOOR SCUFF PLATE LH
67913B
17.REMOVE FRONT DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62112
18.REMOVE COWL SIDE TRIM BOARD LH
62111C
19.REMOVE COWL SIDE TRIM BOARD RH
62312B
20.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
62311B
21.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
67918E
22.REMOVE REAR DOOR SCUFF PLATE LH
67917C
23.REMOVE REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
62332C
24.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
62331C
25.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure as for the LH side.
64740E
26.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
73178A
27.REMOVE SEAT BELT ANCHOR COVER CAP
73233
28.REMOVE OUTER LAP BELT ANCHOR COVER
62414A
29.REMOVE LOWER CENTER PILLAR GARNISH LH
62413A
30.REMOVE LOWER CENTER PILLAR GARNISH RH
Use the same procedure as for the LH side.
77306
31.REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY
Remove the bolt and detach the guide.
Disconnect the fuel lid lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.
77035
32.REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
Partially remove the floor carpet.
It is not necessary to fully remove the floor carpet. Partially remove it so that the fuel lid lock control cable sub-assembly can be removed.
Detach the 2 claws and disconnect the fuel lid lock control cable sub-assembly from the fuel filler opening lid lock retainer in the direction indicated by the arrow in the illustration.
Detach the 12 clamps and remove the fuel lid lock control cable sub-assembly.
77377
33.REMOVE FUEL FILLER OPENING LID LOCK RETAINER
Turn the fuel filler opening lid lock retainer counterclockwise and remove the fuel filler opening lid lock retainer as shown in the illustration.